MainPage » » » » » Engine Inspection Procedure For Mitsubishi L300

Engine Inspection Procedure For Mitsubishi L300

By manuels | Published Thursday, March 28, 2013
With your finger tip lightly tap the centre of the belt between the pulleys in the location shown by the arrow in the illustration and then measure the belt vibration frequency. Apply 98N of pressure against the location between the pulleys shown by the arrow in the illustration and then measure the deflection.

AIR CONDITIONER COMPRESSOR DRIVE BELT TENSION CHECK AND ADJUSTMENT. (1) Loosen tension pulley fixing nut. (2) Adjust belt tension with adjusting bolt. (3) Tighten fixing nut. (4) Check the belt deflection amount and tension, and readjust if necessary. Caution Check after turning the crankshaft once or more clockwise. Check that ignition timing is at the standard value. Standard value. Before inspection, set the vehicle to the pre-inspection condition. Replace the three way catalyst when the CO contents are not within the standard value, even though the result of the inspection is normal on al items. Attach a three-way union to the vacuum hose between the fuel pressure regulator and the air intake plenum, and connect a vacuum gauge.

Download

Posted in , , , . Bookmark the permalink. RSS feed for this post.
Powered by Blogger.

Search