The shift bracket is used for all Ducati Monster within the areas of the year 2000-2004. It can fit other years, but I can not guarantee accuracy did as minor changes over the years. The bracket is used, has to replace Signa tail light / turn / license plate Assembly and has rear section of the frame to which Assembly is pending. It is assumed that the frame has been removed already.
Warning: Cut or in any way change the frames can cause lead, that damage to the motorcycle and affect the performance and/or safety. I do not tolerate or cutting of the frame or the installation of the non-stock components on the bike in violation of local or state laws may be. Please check with your local authorities with regard to the legality of the installation of these components before continuing.
Parts
The shift has over three pieces, which should be mounted as you want prior installation, the wheel bracket. To allow motorcycle for the maximum flexibility in setting up your indicators mount and the tail light bracket. If you have integrated indicators and taillights, let the parts to the other rooms you the appearance of the machine after you install not needed.
Assembly
Set the items as follows with the main bracket on the bottom, then the winker light bracket and the tail light bracket. Screw them together with the provided button head socket head screws and nylon lock nuts insert. Close the screws through the ground and the nuts on the bracket for a clean look from the bottom of the bracket.
