MainPage »
bmw
»
BMW R1200GS Pannier Kit Installation Manual
BMW R1200GS Pannier Kit Installation Manual
6mm Nylock Nuts 68mm Nylock nuts 83/16 washer 105/16 washer 14Pannier Kit InstallPlease read all instructionsand review all pictures before starting assembly.For ease of installation, startbolts 1 or 2 treads until system is completely installed.Then tighten all bolts. Werecommend using Loctite onall bolts.1. Remove turn signalsand disconnect wiring.Remove pins from passenger pegs. Removestock luggage bracketsfrom both sides of bike.2. Remove license plateand place turn signalbracket between mountand license plate. Placeleft and right side railson bike and start the6x90 SH bolt in topmount.3. Place clamps on frame,attach side rails to theclamp using the 8x125SH bolts with nuts.&3/4? spacers4. Attach uprights onboth sides to theclamps using the 8x75SH bolts and nuts5. Attach the bottom boltupright to the pegcrossover.6. Attach peg bolt to theupright crossover.7. Attach the bumper8. Snug all bolts. Youmay have to align theclamps to make surerails are runningstraight.Happy TrailsProductsINSTALL INSTRUCTIONS :800-444-8770BOLT LIST:
Download
Posted in
bmw
.
Bookmark the
permalink.
RSS feed for this post.