Tools required :- Vehicle ramp or jack and axle stands, T20 torx driver, T30 torx driver, pozidrive screwdriver, 7mm hose driver, Sharp craft knife. Safety eyewear, footwear, gloves and protective clothing are also recommended.
1/ Front Bumper removal.
Firstly raise the vehicle on a ramp or with a jack and axle stands. Open the bonnet. Now remove the 2x T20 torx screws from the upper edge of the top grille as per top arrow below, and then remove the 2 hidden pozidrive screws from below the number plate surround as indicated by the bottom arrow below. The top front grille can now be lifted upwards and away from the front of the car.
Now remove the 2x T30 screws that have been uncovered on the top edge of the bumper cover. Remove the 5x T20 Screws down each front wheel arch liner leading edge. Remove the 8x T20 screws from the lower edge of the front bumper.
(Read More on Free Ebook at PDF Format)
Download Forge Motorsport twintercooler for the VW Golf GTI MKV.pdf
