Use the following replacement pads for that State. Repair procedure 1. Remove the front wheel. 2. check the front pads for any irregular wear, loosening two bolts on the brake caliper Assembly. 3. remove the brake caliper and support it to avoid damage? the plastic line. 4. check the front brake pads for wear. If excessively worn pads, then replace the pads with the new part. 5. Add grease caliper disc brake pad clips on both sides support and anti-squeal shims. In Figure 3. Figure 4. 2 1 1 No. 1 disk brake pad support plate 2 No. 2 disc brakes pad support plate: 1 1 Add fat here (Pad support clips) Note install the new anti-squeal shims and Pad brake pad wear indicators in the correct position to ensure quiet work. Figure 5. 1: 1 Add fat in these surfaces 6. Install the pads in the brake caliper support Assembly. 7. set the brake caliper bracket bolts and tighten. Torque: 34 N * m (CSC 347 * cm, 25 ft * lbf) 8. Install the wheel and tighten the nuts of the wheel. Torque: 103 N * m (1050 kg * cm, 76 ft * lbf) 9. Road test the vehicle, rogue? rm, that there are no further problems with the braking system. Download
