Pension 1. Loosen water pump pulley. 2. Download the drive belt idling adjustment screw and remove the belt. 3. Remove the pump pulley water pump. 4. to remove the bolt on the crankshaft pulley Assembly. 5. with the help of SST (09213-31021), remove the crankshaft pulley. 6 Remove bolts and nuts supply chain, as shown in Figure 7. the use of a plastic hammer, loosen at the top of the chain and remove user. 8 remove the drive chain tensioner and time, vibration damper. Budget bolt remove the camshaft sprockets. 10. remove the chain and authority setting inbound. 11. remove the running body with a screwdriver.
If running body you cannot remove with screwdriver, using SST (09213-36020). Installation 1. Install running authority. 2. Set No. 1 TDC. 3. align the camshaft PIN with push plate. 4. to install the body to the circuit of the camshaft. Note: align supply chain and camshaft body mark time. 5. to install the distribution chain to the crankshaft body. Note: align supply chain and crankshaft body marks time. 6. to install body with chain camshaft. 7. Install and tighten the incoming body. Denomination: 54 to 63.5 Nm (40-47 Ft Lb.) 8. Install the drive chain tensioner regulator of vibration. Note: Apply oil tensor before installation. 9. Cover the installation time string Download1984 Toyota Starlet L4-1290Cc 4Ke time chain service and repair
