Caution: disconnect the cushion before removing the steering wheel pad. 1997 Cushion restraint system or cushion article restriction. Remove 1. Place the front wheels turned forward in a straight line. 2. to remove the flywheel. Panel, see Remove wheel. 3. the engine must be switched off. Remove the flywheel nut. The wheel and place Matchmarks on the main axis. Use a set of Extractor c: Hanger 150, shoulder slide, Center of bolts, 150 and no. Nail 2 (SST 09920-50010, 09551-05010, 09552-05010, 09953-05020, 09954-05020), remove the wheel. See fig 27. Figure 27: removing the wheel arrangement of Toyota Motor sales, Inc., United States 4. Remove federšajbite PIN and remove the nut.
The use of a spherical exhaust (SST 09,610 to 20.012), a separate Tie rod end joint of the address. See Figure 28. Figure28: Rod separation connect points of steering ankle concert Toyota Motor SalesInc., United States, 5. Place Matchmarks on the intermediate shaft and axle of the regulating valve. See Figure 29. Screw a loosen and remove the bolt (b). Figure 29: disconnect the intermediate shaft 6. Off the plate. Remove the nut. 7. disconnect the pressure for power and pipes. Using the wrench 14 X 17 mm power steering hose the nut set (SST-09631 22020), turn off the tube. See fig. 30. Download1997 Toyota Avalon Xl steering removal and installation
