remove existing exhaust system. (1) remove the two bolts with springs of the front flange, located between the catalytic converter and rear muffler. (Figure 2-1) (b) keep all bolts of the original equipment (OE) and springs. (Figure 2-1) (1) ensure that the original Gasket between the remains of converter Assembly belt note: Dio, must be replaced install Gasket between the – p/n 17451-74051. (c) remove the two bolts from the rear flange, located between the muffler Assembly and installation of rear exhaust tailpipe is discharged.
(fig 2-2) (d) pry loose from rubber hanger, located near the rear bumperrear Calliper tailpipe exhaust. (Figure 2-3) (e) remove the Assembly of the oe rear tailpipe from the vehicle. pry the two front muffler exhaust brackets loose rubber handles. (Figure 2-4) (g) pry the two rear muffler exhaust brackets loose rubber handles. (fig 2-5) Note: the use of lubrication (for example "SOAP and water") of rubber exhaust handles can facilitate the removal and installation of rubber handles. (h) do not remove the five (5) original (OE) rubber handles from the vehicle. (i) remove the oe muffler Assembly from the vehicle. 3. install trd System. (1) connect the two front muffler handles the muffler Assembly of trd oe rubber handles. Download2007 Toyota Fj Cruiser for muffler installation guide
