Attention: do not forget to read the precautionary statements system of Srs cushion before servicing, refer to systems of service restriction. 1. disconnect the negative battery Terminal warning: at least 90 seconds after disconnecting the negative terminal, wait-the battery to prevent belt Pretensioner () activation and air bags. 2. Remove the direction the whole pad a. face of the front wheels. B. using a T30 Torx "driver, loosen two screws while a Groove along the length of each lap of screw catch in case of screw. C. download platform of the steering wheel and the management of maintenance of the keypad with one hand, as shown in the illustration.
Note: on the abolition of the D-pad, does not download cushion Wire harness. (D) using the screwdriver, disconnect the connectors 2 cushion. Attention: When the management of cushion clutch will not damage cushion Wire harness. E. disconnect the connector Jack and remove the plates to the direction. Installation warning: don't forget to read the precautionary statements system of Srs cushion before servicing. 1. install the platform management direction a. support pad with one hand, as shown in the illustration. B. connect the two air filters. Note: when handling cushion clutch will not damage cushion Wire harness. C. connect the Horn. (D) to install the Steering Panel after confirming that the slots of the circumference of the screws are traps in the event of a screw. DownloadToyota Rav4 2Wd truck Steering Panel for removal and installation of 2007
