Notice: to prevent damage paint, painted surfaces around the cylinder head must be covered. 1. using a line wrench, steel hydraulic line break. The brake hydraulic system offers brake fluid reservoir for the link control system. To prevent loss of brake fluid during removal of link master cylinder, must be connected the hose disconnected hydraulic fluid transfer or directed in a suitable container. 2. disconnect brake liquid transfer hose. 3. Of the engine compartment, remove lower mounting nut. 4. Of the passenger compartment, top nut cylinder head mounting stud link out to delete. 5. Remove link master cylinder and gasket. DISASSEMBLY 1. Press down on the piston and remove the thread stop with needle-nose pliers. 2. stop thread removed, use compressed air to remove the piston and secondary cup meeting, primary cup and return spring. 3. use brake fluid inner parts to clean. Download
