MainPage »
Mercury
»
1999 Mercury Cougar Rear Strut and Spring Assembly REMOVAL AND INSTALLATION
1999 Mercury Cougar Rear Strut and Spring Assembly REMOVAL AND INSTALLATION
Removal All vehicles 1. Remove the wheel and tire. For additional information, refer to Section 204-04. Vehicles with rear drum brakes 2. Disconnect the brake tube. 1. Clamp the flexible brake hose. 2. Disconnect the brake tube union. 3. Remove the retaining clip. 4. Detach the flexible brake hose. Vehicles with rear disc brakes 3. Detach the flexible brake hose and the brake pad wear sensor wiring loom (if equipped) from the strut and spring assembly. 4. Disconnect the brake pad wear sensor electrical connector (if equipped). 5. Detach the anti-lock brake system (ABS) sensor and wiring loom. All Vehicles 6. Detach the stabilizer bar connecting link and bushing from the front arm. 7. Detach the rear arm from the wheel spindle. 8. Detach the
tie-bar from the wheel spindle. 9. Detach the front arm from the wheel spindle. 10. Remove the wheel spindle to strut and spring assembly pinch bolt. 11. CAUTION: Secure the wheel spindle to prevent damage to the parking brake cable and brake hose (disc brake vehicles only). Detach the wheel spindle from the strut and spring assembly. 12. Detach the strut and spring assembly from the crossmember. 1. Raise the strut and spring assembly on a jack. 2. Detach the strut and spring assembly from the crossmember. 13. Remove the strut and spring assembly.
download
Posted in
Mercury
.
Bookmark the
permalink.
RSS feed for this post.