Free Online Manual

626IV, MX6, Mazda Xedos/Ford Probe II/Saab 900, 9000 brake caliper adjustment

Brake caliper with integral parking brake on the rear axle. To make sure that the parking brake works perfectly when new brake caliper installed, and each time has replaced brake pads piston should be adjusted as follows: delete: release/unclip the manual cable Remove the screw plug ()-see. Figure. 1 relax socket screw (see Figure 2). Remove the piston, until it stops moving. Installation: Screw in the socket screw in a clockwise direction (fig. 3) until the brake pads touch brake disc and brake disc becomes hard to rotate. Then slacken the adjuster screw between one third and one half of the rotation (brake disc will turn easily-see Figure 4). Screw in and tighten the screw plug (1) rice. 5. connect the brake cable and configure it according to the manufacturer's instructions. Download