1 removal. Open compartment hood and fit paint protection covers for fenders. Increase and support vehicle. Remove wheels. 2. release the tension on the parking brake cable by moving the brake lever parking brake caliper from the end of the cable. Remove the brake lever cable cable parking. See fig. 32. 3. remove the parking brake cable from the rear caliper. Remove the retaining clip on vehicles with manual custom parking brakes. See fig. 33. On vehicles with self-adjusting parking brakes, release the tabs on the parking brake cable housing. See fig. 38. Note: to prevent the loss of brake fluid, application of the brake pedal hold tools and customize to keep the brake pedal down 1.6.5? (40 mm). A bottle Drainage mechanism to install the bleed nipple and los of the bleed nipple. 4. Remove Union bolt from the rear brake caliper slang and sealing washers ignore. See fig. 61. Brake hose from rear brake caliper delete. 5. tighten the bleed nipple and remove the venting tube and bottle. Delete and ignore the rear caliper retaining bolts. See fig. 62. Remove the brake caliper. 6. Cleaning and inspect all its components. Installation Note: The piston caliper may cause the liquid reservoir overflow menu choice. Brake fluid spills immediately remove paint work with clean water. Note: The left piston caliper rear brake pulls against the clock in and pulls the piston caliper rear right clockwise. 1. using the brake caliper piston retractor Tool (206-080) and crankshaft pulley/damper Remover (303-588), fully withdraw the piston caliper rear brake in the housing of the caliper. Download
