MainPage »
Mercury
»
1999 Mercury Cougar Engine With: Automatic Transaxle Removal
1999 Mercury Cougar Engine With: Automatic Transaxle Removal
1. NOTE: The location of engine mountings and engine support insulators are described looking from the transaxle to the engine. Remove the front wheels. For additional information, refer to Section 204-04. 2. Remove the battery. For additional information, refer to Section 414-01. 3. Remove the hood. 4. Remove the bolts and the water pump pulley cover. 1. Detach the coolant hose from the clip. 2. Remove the bolts. 3. Remove the cover. 5. Remove the air cleaner (ACL). For additional information, refer to Section 303-12B. 6. Drain the cooling system. For additional information, refer to Section 303-03. 7. Disconnect the accelerator and speed control cables. 1. Detach the cables from the bracket. 2. Disconnect the accelerator and speed control cables. 8. Remove the selector cable. 1. Remove the bolts. 2. Disconnect the cable. 9. Disconnect the bulkhead electrical connectors. 1. Disconnect the electrical connector. 2. Remove the bolt and disconnect the electrical connector. 10. Detach the central junction box (CJB) and position it to one side. 11. Disconnect the cables. 1. Battery cables. 2. Electrical connector. 3. Ground cable. 12. Disconnect the fan motor electrical connectors. 13. Remove the battery bracket bolts and remove the two ground cables. 14. Remove the battery bracket. 15. Disconnect the fuel line. For additional information, refer to Section 310-00. 16. Disconnect the heater hoses. 17. Disconnect the coolant hoses from the radiator and from the coolant passage. download
Posted in
Mercury
.
Bookmark the
permalink.
RSS feed for this post.