Free Online Manual

Mazda RX-8 REAR SWAY BAR installation

The ORIGINAL REAR STABILIZER to REMOVE 1. Remove the following parts shown in figure. REAR STABILIZER set vehicle front rear stabilizer set 1. Alignment with the direction and shape of a standard stabilizer, then install. Car front bushings installation 1. Install the sleeve, so that they are consistent with the flanged stop. Stop bad bushing flange angle correct angle stabilizer installation link 1. Install the stabilizer control link to the proper angle as shown. • CAUTION do not forget to link control the stabilizer in the correct position. If it is not set correctly, the stabilizer control links can prevent peripheral components when driving, damaging each other. Removed parts reset 1. Reinstall the parts in section [3] in reverse order or to delete. Download