Proposed instruments: Floor Jack Jack stands (2) slots: 12 mm, 14 mm, 15 mm Socket extensions installation steps – Spring compressor front SPRINGS 1. Throw in front of vehicle and support with Jack stands. 2. remove both front wheels of the vehicle. 3. using a 15 mm socket, remove the bolt from the arm, tie: 4. using 12 mm socket, remove the bolt holding the brake line on site: 5. using a 15 mm socket, remove the bolt from the lower strut clip. 6. using a 14 mm socket, remove the bolt from the bottom front stabilizer link. 7. Support bottom axis strut does not fall down to the next step. 8. remove the 3 screws mount rack 14 mm from the top of the strut towers, under the hood. 9 Rack/spring combo can now removed from the vehicle. Use Spring compressor disposal of stockpiles of spring with around support. You will want to space the spring compressor at least 3 coil between the upper and lower "hooks" the compressor make sure you compress the spring enough. 10. safely remove the compressed spring from the stock strut and decompress the spring slowly and evenly. Repeat steps 3-10 on the other side of the car. Installing Aftermarket Springs 11. Compress the new spring and place on top of the anvil. 12. Select the stock strut/Spring "cap and be sure to align one of the upper boltholes with a sign" bracket/clamp button at the bottom of the strut. This is key, because the props are not reset, if not done properly! a. torque the nut to the center of the strut bolt as much as possible, using a pair of Pliers to hold the center post is a wrench to turn the nut. If you do not follow up post Centre until now, it will spin the nut as you get closer to the end. You should have 2-3 threads appear if you tightened down all the way. b. slowly decompress the spring and make sure everything is lined, including at the bottom of the spring. 13. Select the wishbone on the axle. 14. Insert poles into the car, and then to the top (3), 14 mm bolts through the upper strut towers. 15. Insert lower wishbone Fulcrum in, making sure that the bottom of the strut lines properly. Download
