Free Online Manual

2004-2008 Acura TSX power steering hose leaking channel

VON long high under-hood temperatures can lead to hose GUR deteriorate prematurely and could cause the hose to crack and leakage of fluid INTELLIGENCE. Power steering fluid leak on a hot exhaust pipe would generate smoke and could cause a fire under the hood. Corrective action to establish a set of pipes hose GUR. Information on PARTS of the DEFENCE INTELLIGENCE to feed hose kit P/N 06530-SEC-A00 (includes power steering, fed hose [with booster pump party ring attached] and power steering pressure switch ring) REPAIR procedures Note: take care not to spill liquids GUR on the body and other parts. Wipe any spilled liquids at once. 1. Call GUR reservoir, and then return hose and drain reservoirs. Connect the return hose nipple with matching cap. POWER STEERING RESERVOIR 6. Remove the heat shield RMG, and then below the vehicle on the ground. RETURN HOSE HOSE, 7. Disconnect the power steering pressure switch connector. The UPPER LEVEL LINE CONNECTOR 2. Connect the hose suitable diameter to disconnected return hose and put an end to the hose in a suitable container. 3. start the engine, let it run at idle and rotate steering wheel from lock to multiple times. When the liquid hose, turn the engine stops. Discard liquid. Note: check your reservoir screen for any debris. If the reservoir clogged, replace the reservoir. 4. remove the cover from return hose nipple at the reservoir, and then reinstall the return hose on the reservoir. 5. raise the car lift and make sure it is securely supported. POWER STEERING PRESSURE SWITCH

Download