Free Online Manual

Installing and removing tank washer 2002 – 2005, Audi A4

The upper part of the shell, remove-remove the cover left engine – 1 –. -Where applicable, remove the overflow hose – 2 – 3 – from the reservoir is. -Remove the nut and bolt – 1 – 4 –. -Pull the top of the tank up from the bottom. The lower part of the reservoir, delete – delete the left front wheel. -Remove the left front wheel housing liner::::: > Body appearance – repair group 66. -Remove the bottom of the reservoir is 2 – arrow-. -Swivel the bottom of the reservoir a little behind. Note: If the bend at the bottom of the reservoir, it is impossible to remove the bolt – 4 – and detach cross members – 1 –. -Where applicable, disconnect the hose – 3 – overflow reservoir section. -Disable electrical connections-2 ... 4 – . – Press release Tab and pull off the sleeve Connector-1 –. To pull off the washing liquid tubes-5 –. -Remove the washer reservoir down. Install the washer fluid reservoir – Audi A4 84, removing and installing the Setup in the reverse order of removal, noting the following: Note: the net flow • bolts from the remnants of blocking fluid using a wire brush. Then apply locking fluid and suitable bolts. Locking fluid catalogues. • Net tap holes from the remnants of self-locking bolts or locking fluid (for example, using a crane). Otherwise you can shear bolts if they should be deleted later. -When installing, make sure that the hose water clearly involved in connecting a washing liquid pump. – Tighten bolts in sequence-1 ... 3 – . Tighter times

Download