Free Online Manual

Audi TT / VW GTI/Jetta/Golf performance chip upgrade installationinstructions

This handout is provided to you through the steps necessary to upgrade your vehicle with our performance chips run. Also note, that APR is just a call away you should all have any questions or concerns in relation to products Apr.

Step 1: Car park.
Safe car lights and is key from the ignition. The parking brake to engage. (Optional): remove the battery cables. Be careful! Determine the correct encoding for the anti-theft-radio before disconnecting the battery.
Step 2: Remove the wiper.
Remove windshield wipers slightly off and use of ECM.
Use a flat head screwdriver, remove the plastic cover from the wiper arm. Remove the wiper arms by unlocking the 13 mm slot secure the wiper arms. After the mother is removed the wipers must be wiggled arm, to remove the arm from the tray. Take care, keep in mind the position of the wiper arm for re instillation.
Repeat this procedure for both sides.
Step 3: Remove the factory weather stripping.
Step 4: raise you plastic lid of pollen filter.
Step 5: Remove plastic angle, location of tabs in the light
Step 6: Press tab wiring harness on the left side, and remove left harness.

Download