Free Online Manual

Removing/installing 2005 Acura RL glove box

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service. Note: use the appropriate tool from the KTC trim tool in order to avoid damage to other components. Take care not to scratch the dashboard and the relevant parts. 1. remove the passenger in secret. 2. open the glove box (A) and (B) of the paper tray. Remove the cover (C), then remove the screws (D) and (E) of the Bolt. 3. close the glove box (A), and then remove the screws. 4. remove the glove box (A). 1. pull the glove box, and then delete the clips (B). 2. remove the wire harness clip (C) and ambient light bulb socket (D). 3. unplug the trunk lid opener main switch connector (E). 5. Select the check box in the reverse order of removal, and note these items: check if the clips are damaged or stress of work and, if necessary, replace them with new ones. Push the clips into place securely. Make sure that the connector is connected correctly, and the bulb power connector is connected securely. Take care not to scratch the front passenger's console.

Download